Large and special projects
Back
Wall Insert
Double wall insert
adjustable length, for setting in concrete
HSI150 K2 Varia
"For the gas-tight and watertight connection on both sides of system seals for cables or cable ducts, providing high flexibility for future use."
Cable entry system
System cover
with sleeve method for plastic spiral duct
KES MA150 D
Article no.
For use with wall insert and polymer flange HSI150, and for connecting ducts The seal is created using the sleeve method, clamping a rubber sleeve onto both the system cover and the plastic spiral hose with …
Sleeve
for cable sealing at the end of the duct
KES150 MA160-172/140-163 WE
Article no.
For installation at the end of the Hateflex spiral duct 14150. Cables can be sealed within the sleeve by using the interchangeable insert WE160 z/d The entire cross-section of the duct is available when the …
Interchangeable insert
for cable sealing at the end of the duct
WE160 z/d
Article no.
For installation within the KES150 MA WE sleeve to seal cables at the end of the Hateflex spiral duct 14150
Plastic spiral hose
for cable entry system
Hateflex14150/xB
Flexible and very rugged duct A pressure-tight cable entry system can be created with the matching connection components.
Sealing for wall insert on the building inside
Split system cover
for retrofit sealing
HSI150 DG
For use in wall insert and polymer flange HSI150. Split design for sealing new installed cables or cables that have already been installed.
Sealing suitable for core drilled hole (water proof concrete)
Standard press seal
sealing width 40 mm
HSD b40
For sealing new or already installed pipes in core drill holes or wall sleeves. Available for delivery for all standard pipe sizes.
Cable entry system
Connection set for cable entry system with core drill holes/wall sleeve
for retrofit installation
KES150 MA KB SET
Article no.
For connecting the Hateflex spiral duct 14150 to core drills or wall sleeves. The pipe socket is connected to the duct with a sleeve. Sealing is done with the two press seals (included in scope of delivery).
Plastic spiral hose
for cable entry system
Hateflex14150/xB
Flexible and very rugged duct A pressure-tight cable entry system can be created with the matching connection components.
Cable sealing in duct
Standard press seal
with super segmented ring technology and polymer press plates
HRK SSG b40 PAGF/A4/EPDM
Press seal for sealing cables in core drills or sleeves Split design for sealing new installed cables or cables that have already been installed.
